![]() If improper, do theta adjustment Check in this order: 1. Perform Z Axis Adjustment for Tool Height. Inconsistent Tool/ Material Contact Jagged or Serrated Cutting Edges Thick and Thin Strokes 1. Plotter Error Press Reset on the plotter. ![]() Poor Performance Perform routine cleaning and lubrication. ![]() Symptom Recommended Procedure No power 1. CAUTION: Turn off GS750 plus plotter and GRAPHIX ADVANTAGE or other sign design system before checking connections or attempting to make any adjustments, unless otherwise directed. Troubleshooting Guide Plotter Adjustments 57 This chart of symptoms is designed to help identify the possible problem and the probable adjustment procedure. Reach up from inside the plotter stand to remove this screw. ![]() Remove the screw from the center of the bottom edge of the plotter end plate (located between the screws for the plotter stand assembly). Remove the screw located in the center of the top edge of the plotter left end plate. Remove the plotter cover from the left side of the plotter (opposite the front panel end) by removing the two Phillips head screws which hold the cover in place (see steps 2 and 3). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |